C&M Open-End Manual Tie Balers
C&M Open-End Manual Tie Balers
C & M Manual Tie Horizontal Open-End Balers for lower cost low and medium production baling of paper, paper trim, corrugated & box board trim, non-wovens, aluminum beverage containers, and other industrial trimmings & by-products. This style baler has the advantages of open-end production requiring only about 50% of the labor compared to a closed-end manual tie baler. Open-end manual tie bales are useful when baling multi-material such as a few bales of OCC, then a couple bales of plastic film or use beverage containers. Bale lengths are programmable or can be tied short with a one button depression...as is need when baling multi-materials for bale separation wen changing to another material.
STANDARD C&M SINGLE RAM OPEN END MANUAL TIE MODELS
| SERIES | 2424 | 3030 | 3430 | 3442 | 5030 | 5042 | 6042 | 6046 |
|---|---|---|---|---|---|---|---|---|
| HOPPER/FEED OPENING(LxW) | 24 X 24 | 30 X 30 | 34 X 30 | 34 X 42 | 50 X 30 | 50 X 42 | 60 X 42 | 60 X 46 |
| STROKES PER MINUTE | 2 to 5 | 2 to 5 | 2 to 6 | 2 to 6 | 2 to 6 | 2 to 6 | 2 to 6 | 2 to 6 |
| CYLINDER BORE | 6, 7, 8 or 10 | 6, 7, 8 or 10 | 6, 7, 8 or 10 | 6, 7, 8 or 10 | 7,8 or 10 | 7,8 or 10 | 7, 8 or 10 | 7, 8 or 10 |
| POWER UNIT HP | 20 to 60 | 20 to 50 | 30 to 50 | 30 to 50 | 30 to 50 | 30 to 60 | 30 to 60 | 30 to 60 |